Cisco SX80 Panduan Referensi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Sistem Konferensi Cisco SX80. Cisco SX80 8 halaman. With touchpad 10
Juga untuk Cisco SX80: Panduan Instalasi (7 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Pengguna (19 halaman), Panduan Instalasi (24 halaman), Panduan Instalasi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Instalasi (7 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco SX80 Panduan Referensi
Cisco TelePresence SX20/SX80 Reference Guide
Ensure that the power cable is
1
plugged into the power outlet in
the wall.
Confirm that the network cable
2
is plugged into the network outlet
in the wall. The network cable
must be plugged into a dedicated
OTN network outlet.
3
Verify that the power bar is
turned on. The power bar
supplies the whole system, and
you can turn off your system here
at the end of your session.
4
Ensure that the monitor is on.
5
Check that the codec/camera
is on by checking the LED light at
the front of the codec.
6
Pick up the remote control and
unmute your videoconferencing
sound by pressing the "Mic Off"
button on the remote control.
7
Turn the Self view on by
navigating to the camera icon
using the remote control arrows
and selecting the thumbtack icon.
March 2023 | pg. 2