Cisco TelePresence DX80 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence DX80. Cisco TelePresence DX80 33 halaman. Touchscreen mbtelehealth a shared health service
Juga untuk Cisco TelePresence DX80: Panduan Instalasi (6 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (48 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (40 halaman), Manual (43 halaman), Menyiapkan (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (8 halaman)

Call Rate

Change Call Rate

Tap the Call button, then locate the entry

whose call rate you want to alter. Tap this entry

to produce the Call menu and then tap the

More ( ... ) icon below the green Call button, as

shown.

Move the slider to the required setting.

Tap Custom call.

Tap the green Call button to place the call.

About Call Rate

Call rate is the term used to express

the amount of bandwidth allocated

to the call and is measured in kbps

(kilobits per second).

The higher the call rate is, the

better the quality will be, but on

the expense of higher bandwidth

consumption.

The system comes with a default

call rate. This is set by your video

support team as a part of the

Administrator Settings (password

protected).

Why would you like to temporarily

change this setting? In most cases

you will use it to avoid choking

the video call when you try to call

someone at a higher rate than their

system and connection actually

support.

Call rate cannot be changed during

a call, but you may change it just

before you place a call, as shown

here.

D1510413 User Guide

Cisco TelePresence DX70, DX80

Produced: April 2016 for CE8.2