Cisco TelePresence IP VCR 2200 Series Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Memulai untuk Sistem Konferensi Cisco TelePresence IP VCR 2200 Series. Cisco TelePresence IP VCR 2200 Series 15 halaman.

Halaman Cetak

Configuring the VCR

Step one: Log in to the VCR

All administration of the VCR is performed via the web interface.
To log in to the web interface of the VCR:
1
Use your browser to navigate to the IP address of the VCR (to discover the IP
address, refer to the previous section).
2
Click
Click here to log in
name
admin
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, go to
provide the required user information.

Step two: Using an H.323 gatekeeper or SIP registrar (optional)

Using an H.323 gatekeeper makes it easier for H.323 end-users to watch and make
recordings using directory numbers rather than requiring them to know the IP
address or host name of the VCR. Likewise, a SIP registrar makes it easier for SIP
users to watch and make recordings.
To configure the VCR to use an H.323 gatekeeper:
1
In the web interface of the VCR, go to
2
Enable
H.323 gatekeeper usage
the online help for further assistance.
3
Click
Apply changes
To configure the VCR to use a SIP registrar:
1
In the web interface, go to
2
Configure the settings you require, using the online help for further assistance.
3
Click
Apply changes
Before you configure the VCR to use, and register recordings to, a SIP
i
registrar, you must set up the VCR and its recordings on that SIP
registrar.
, and then click
with no password.
.
Settings > SIP
.
Change log in
, click the
Users
Settings > Gatekeeper
and configure the settings you require, using
.
Configuring the VCR
and enter the user
link, and
admin
.
9