Cisco TelePresence IX5000 Manual - Halaman 41

Jelajahi secara online atau unduh pdf Manual untuk Sistem Konferensi Cisco TelePresence IX5000. Cisco TelePresence IX5000 44 halaman. Field-replaceable units and countryand region-specific power connectors
Juga untuk Cisco TelePresence IX5000: Panduan Pengguna Mulai Cepat (15 halaman), Panduan Pengguna (26 halaman), Panduan Instalasi (36 halaman), Pengaturan Pertama Kali (40 halaman)

Halaman Cetak

Procedure

Step 1

Remove the mute button covers. This procedure is the same for either the first or second row.

Step 2

(Center first row microphone and all 2nd row microphones only) Remove the front panel from the table

section from which the mic bar will be removed.

Step 3

From underneath the table section, remove the screws that connect the mic bar to the table (six per mic

bar) using a #2 Phillips driver.

Note

If a cable for the Touch 10 goes through the center of the mic bar, unscrew the screw that secures the mic

bar cap to the mic bar, disconnect the Ethernet cable from the Touch 10 device, and thread the Ethernet

cable out from the center of the mic bar,

Replacing a Microphone (Mic) Bar—Part Number CTS-5K-MIC=

IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors