Cisco TelePresence IX5200 Pengaturan Pertama Kali - Halaman 25
Jelajahi secara online atau unduh pdf Pengaturan Pertama Kali untuk Sistem Konferensi Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 halaman.
Juga untuk Cisco TelePresence IX5200: Panduan Pengguna Mulai Cepat (15 halaman), Panduan Pengguna (26 halaman), Panduan Instalasi (36 halaman)
Halaman Cetak
If your system has a whiteboard, set up the whiteboard for viewing by completing the following steps.
Step 6
Whiteboards must have the following characteristics:
The whiteboard must have a width-to-height ratio of 16:9. Other width-to-height ratios cause the
•
whiteboard to be stretched or compressed when it is reproduced.
The whiteboard must be entirely in the viewable area of a single camera. See
•
for examples.
a.
Place the four red magnetic targets (included with the system) on the corners of the whiteboard
target. If your whiteboard ratio is not 16:9, move the targets until the ratio is 16:9.
If your whiteboard is not magnetic, place tape on the back of the targets.
Tip
OL-27038-01
Cisco TelePresence IX5000 and IX5200 First-Time Setup
Performing First-Time Setup
Figure 4 on page 14
25