Cisco TelePresence MX700 Panduan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence MX700. Cisco TelePresence MX700 32 halaman. Single camera on a free standing floor stand or a floor stand secured to the wall
Juga untuk Cisco TelePresence MX700: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (29 halaman), Panduan Instalasi (32 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (29 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence MX700 Panduan Instalasi
Installation guide for Cisco TelePresence MX700 Dual camera - Wall mount
12

Fasten right monitor and connect power cable

4 × M6x90
(countersunk)
4 × M6x35
(countersunk)
78-100279-01 B0 | 2014 JUNE | © 2014 Cisco Systems, Inc. All rights reserved.
Enter four screws from front and
1
four screws from underneath.
Then, tighten all screws.
Connect the loose end of the power
2
cable from step 10 to the close-by
socket at the rear of the right monitor.
The socket must be reached from below.
Make sure the power switch next to the
socket is in its ON position.
Page 15