Cisco TelePresence MX700 Panduan Instalasi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence MX700. Cisco TelePresence MX700 29 halaman. Single camera on a free standing floor stand or a floor stand secured to the wall
Juga untuk Cisco TelePresence MX700: Panduan Instalasi (32 halaman), Panduan Memulai Cepat (12 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (32 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (29 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence MX700 Panduan Instalasi
Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
17
Mount loudspeakers
H
Two loudspeakers are pre-installed. Follow
steps 1-3 for the remaining seven loudspeakers.
Connect the cable that is marked with the
1
correct position to the loudspeaker.
Enter the loudspeaker onto the speaker clip.
2
Make sure the cable is not pinched.
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
The loudspeaker
cables are marked
1
with a number. These
numbers must match
the position of the
loudspeakers, as
shown here.
Cable number 4, above
the right monitor, is not
used.
Fasten with one screw.
3
2
3
4
5
7 ×
PT4x10, pan
(one for each loudspeaker)
1
2
3
5
Page 23