Cisco Telepresence MX800 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 16 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Manual Penggantian (46 halaman), Manual Penggantian (47 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco Telepresence MX800 Panduan Instalasi
Installation guide for Cisco TelePresence MX800 Single - Wall mount
8

Connect cables

B, E
Remove protection foam
from cameras. Make sure
that cameras can move freely
before connecting power.
Always use the power cables
provided.
The plug-socket combination
must always be accessible,
because it serves as the main
disconnecting device.
Power (100-240 VAC, 50/60 Hz),
extension cord, and country-specific cable
78-100255-02A0 | AUGUST 2015 | © 2015 Cisco Systems, Inc. All rights reserved.
(page 1 of 2)
Microphones
(max 8)
Network
1
Codec connector panel
Video input
(for example
computer)
2
Route the cables along
the lower frame, and place
them in the cable bridge.
CAT 5e, shielded Ethernet cable, 5 m.
1
Two presentation cables are provided: HDMI ↔ HDMI;
2
and DVI/Euroblock ↔ VGA/mini jack.
Page 12