Cisco Telepresence MX800 Manual Penggantian - Halaman 17

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 47 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (46 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Cisco TelePresence MX800 Dual

Contents

Replace dual camera module

Step 2:

Remove loudspeakers from positions 4, 5 and 6 above

left monitor and positions 2 and 3 above right monitor

This procedure is shown for loudspeaker 5 above the left monitor. Repeat

the procedure for loudspeaker 4 and 6 above the left monitor, and 2 and 3

above the right monitor.

When reconnecting a loudspeaker, make sure to connect the

correct cable. The cables are marked with the loudspeaker's

position. Loudspeaker cable 1 above the right monitor is not used.

Remove screw.

PT4x10, Torx T20

D15327.01 MX800 Dual Replacement Guide, MAY 2015.

Introduction

Grilles and covers

(page 2 of 7)

Pull loudspeaker 10-15 cm (4-6 inch) out.

Speakers and cameras

Loudspeaker

positions

Replacement Guide

Codec and monitors

Appendix

Unplug the cable from the connector on

the back of the loudspeaker.