Cisco Telepresence MX800 Manual Penggantian - Halaman 39

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 47 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (46 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Cisco Telepresence MX800 Manual Penggantian
Cisco TelePresence MX800 Dual
Contents
Replace monitor (wall mounted)
Step 5: Install support handles
First remove the support handles from your
replacement monitor as illustrated.
Then mount the handles on the monitor you
want to replace.
This is neccessary in order to safely lift the
monitor.
D15327.01 MX800 Dual Replacement Guide, MAY 2015.
Introduction
Grilles and covers
(page 3 of 8)
Unscrew the screws (4 × M4x8,
5a
two on each handle) and remove
the two support handles from the
replacement monitor.
Mount the brackets and handles on
5c
the monitor you want to replace.
Speakers and cameras
5b
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
39
Replacement Guide
Codec and monitors
Codec and monitors
Appendix
Unscrew the screws (2 × M4x8, one
on each bracket) and remove the
brackets that the support handles
were fastened to.