Cisco Telepresence MX800 Panduan Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 16 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (46 halaman), Manual Penggantian (47 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco Telepresence MX800 Panduan Instalasi
Installation guide for Cisco TelePresence MX800 - Floor stand
7

Start up the system

•
Remove the protection foil from the display.
•
Make sure the camera(s) can move freely.
•
Insert the network and power cables into the wall outlets.
•
Switch on the system.
The power switch is located directly below the codec, next to
the power connector.
Wait a few minutes while the system starts up. The start-up
may include automatic software upgrade and restart of
Touch 10 and camera(s).
•
Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to
get started with Spark registered systems, visit
http://help.ciscospark.com
articles for room systems.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
http://www.cisco.com/go/mx-docs
78-100219-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
and look for Getting Started
Page 13
http://www.cisco.com/go/mx-docs