Cisco Telepresence MX800 Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 45 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (46 halaman), Manual Penggantian (47 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Communicate over the API

Table of contents

The video system and the control system exchange messages through the xAPI

to make sure that the Touch 10 in-room control panel truly reflects the status of

Introduction

the room.

The video system sends one or more events when someone uses one of the

Create a user interface

controls on the Touch 10 in-room control panel, and the control system should

send a command to the video system when there is a change in the room.

API for in-room control

Touch 10

Widgets

Command reference

Troubleshooting

The video system and the control system exchange messages through the xAPI.

Tips and tricks

Examples:

• When someone taps a Lights On button on Touch 10, the video system

sends the associated events. The control system should respond to these

Examples

events by switching on the lights in the room and send the corresponding

command back to the video system.

• When someone switch on the lights in the room, the control system should

send a command to the video system, so that the video system can update

the Touch 10 in-room control panel to reflect that the light is on.

Consult the

commands and statuses for in-room control.

D15358.01 APRIL 2016

Collaboration Endpoint software

version 8.1

xAPI

Commands

Video system

Events

Command reference

chapter for an overview of all relevant events,

Control system