Cisco TelePresence Profile 55 Panduan Memulai - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Sistem Konferensi Cisco TelePresence Profile 55. Cisco TelePresence Profile 55 46 halaman. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Juga untuk Cisco TelePresence Profile 55: Panduan Memulai (42 halaman), Instalasi (2 halaman)
Halaman Cetak
Cisco TelePresence Video Systems
Contents
Configuration using the web interface
You have to use the Touch controller or the remote control for
the configurations, until you know your system's IP address.
Finding the IP address
Tap
Settings > System Information
on your Touch controller; or
navigate to
Home > Settings > System information
the remote control and on-screen menu.
In both cases you can find the IPv4 address and/or IPv6 address
of the system in the
Network
section.
Signing in to the web interface
1. Open a web browser and enter the system's IP address in
the address bar.
2. Enter your user name and password and click
The default user name is
admin
with no password set.
If you are not able to connect to the system:
• Make sure the system and computer are connected to the
same network.
• Make sure the system is switched on.
If the system has just been switched on, wait a few minutes to
allow the system to start up.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
if you use
Sign
In.
Configuration
Configuration
The web interface
23
Getting Started Guide
Appendices
Contacts
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.