Fimap ENJOY 360 Penyesuaian

Jelajahi secara online atau unduh pdf Penyesuaian untuk Mesin Lantai Fimap ENJOY 360. Fimap ENJOY 360 8 halaman.

Halaman Cetak

ADJUSTMENTS AND INSPECTIONS

READ THE OPERATING AND MAINTENANCE MANUAL

Testing the Electric System

1. Remove the battery connector.

2. Check that the battery connection cables are clean

and tight.

3. Check that the power cables are connected and

tight:

batteries,

switches

(both in the electric system box and in the

suction head), motors etc.

4. Check the state of the



Main

3,5 A



Suction

20 A



Brushes

25 A



Traction

60 A

5. Reconnect the battery connector.

6. Turn the key to turn the machine on.

7. Check signal lamps and switches:



Check that the key operates correctly;



Check that the hour meter operates correctly;



Check that the start control switch operates

correctly: forward and reverse;



Check that the battery monitoring LEDs operate

correctly;



Check that the horn operates correctly;



Check

that

correctly;



Check that the reverse buzzer operates correctly.

Attention : if you use

GEL BATTERIES, on the

internal side of the check

batteries remove the

jumper

located under

the

protection

ADJUSTMENTS AND

INSPECTIONS

connectors,

remote

thermal

fuses:

the

seat

microswitch

ENJOY 360

control

operates

Doc.

10005053

Issued

12/2006

Rev.

Page

1 of 8