Cisco TelePresence SpeakerTrack 60 Manual Kamera - Halaman 22
Jelajahi secara online atau unduh pdf Manual Kamera untuk Sistem Konferensi Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 halaman. Telepresence
Juga untuk Cisco TelePresence SpeakerTrack 60: Lembar data (3 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (14 halaman), Manual (22 halaman), Manual Kamera (44 halaman)
Halaman Cetak
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents
Connect SpeakerTrack 60 to Codec C60
•
Connect the video cables (HDMI).
Left camera: Connect between Connector 1 (HDMI input) on the
codec to the HDMI input of the left camera.
Right camera: Connect between Connector 2 (HDMI input) on the
codec to the HDMI input of the right camera.
•
Connect the camera control cable (Ethernet). Connect between
the codec's 2nd Ethernet port and the Network port (Ethernet) on
the SpeakerTrack 60 connector panel.
•
Connect the power adapter to the SpeakerTrack 60 connector
panel and connect to power.
•
Connect other codec cables as described in
Telepresence Codec C60 installation
HDMI 1
HDMI 2
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
guide.
RJ45
Power
(100-240 V
AC
Connecting to a codec
Connecting to a codec
When using a SpeakerTrack 60 with a C Series codec, the
codec cannot be controlled with the TRC5 (Cisco Remote
Control). Instead, a Cisco TelePresence Touch 8 user interface
or an external control device must be used.
Right
Power
adapter
Always use the provided power
, 50/60 Hz)
cable and adapter.
22
Factory reset
Appendix
Left
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide