Cisco TelePresence SX10 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 26 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Halaman Cetak

Cisco TelePresence SX10 Panduan Pengguna

Place Call

Place Call Using Name, Number or Video Address

Make sure Call is selected and

press OK or the green Call

button.

As soon as you start typing, the

green Call button will appear to

allow you to place the call any

time.

Possible matches will appear

as you type. If no matches are

found, this will also be indicated.

Use the Cursor keys to select

the Search or Dial field, as

outlined.

Press the red End Call button or

use the Cursor keys to select

End and press OK to terminate

the call.

To enter numbers just press

the corresponding keys on the

remote.

To invoke the virtual keyboard,

use the left arrow Cursor key to

move to the 123 field. You may

now move about the keyboard

and select characters. Press OK

to select a character.

About Placing Calls

You may call someone who is not

listed in your list of contacts by

keying in their name, address or

number using the virtual keyboard.

Anyone you have previously called

will appear in the Recents list (until

you clear that list) and you may then

transfer any of them to your list of

Favorites. This is described in the

section Contacts.

Call Using Video Address

The procedure when using a video

address to call someone is similar.

Just key in the address and use

separator. The system will interpret

it correctly and convert it for you so

that the video address appears as

correctly entered.

D1509703 User Guide Cisco TelePresence SX10

Produced: July 2014 for TC7.2