Fimap FS50 HT Panduan Penggunaan dan Perawatan - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Mesin Lantai Fimap FS50 HT. Fimap FS50 HT 19 halaman.
Halaman Cetak
18.
THE CENTRAL BRUSH DOES NOT CLEAN
•
The brush is worn or improperly positioned: adjust its position or, if necessary, have it
replaced at your nearest FIMAP service centre.
•
The waste bin is full: empty it.
•
The brush does not rotate because the belt is broken: have it replaced at your nearest
FIMAP service centre.
19.
THE MACHINE CREATES AIRBORNE DUST WHEN WORKING
•
Flaps ensuring good suction are torn. Replace them.
•
The filter is clogged: thoroughly clean the filter.
•
The front flap is broken and the machine throws heavy dirt and waste forward: replace the
front flap.
20.
EXCESSIVE OR ABNORMAL NOIS FROM THE CENTRAL BRUSH
•
Material is wound around the brush: remove it.
21.
ACID SPILLAGES FROM THE BATTERY
In case of any acid spillages resulting from a split or otherwise faulty battery, please replace it
immediately.
ATTENTION: Use rubber protective gloves when handling the battery. The
sulphuric acid in the battery is highly corrosive. Avoid any direct contact
with skin.
TROUBLE SHOOTING GUIDE:
17