Cisco TelePresence SX10 Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 38 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Pengguna (26 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Video Calls

Enable Do Not Disturb

Starting from Home screen, use the Cursor keys on the remote

control to select the Settings icon in the upper left corner of

the screen.

Use the Cursor keys on the remote control to navigate down to

Do Not Disturb and use the OK button on the remote control to

set it to On or Off (toggling).

D1509712 User Guide

Cisco TelePresence SX10, SX20

Produced: June 2017 for CE9.1

Press OK on the remote control.

Press the OK key on the remote control to exit the menu, putting

changes into effect.

Your system can be set up so that it

does not respond to incoming calls.

When set to Do Not Disturb,

ringtones are muted and call

attempts made by others to reach

you will appear as missed calls. You

may, however, place calls as much

as you like.

As default, there is a 60 minutes

timeout on the Do not disturb (after

which the system will return to

normal operation), but this may have

been changed to a different setting

by your Video Support Team.