Cisco TelePresence SX10 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 38 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Pengguna (26 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Halaman Cetak
Cisco TelePresence SX10 Panduan Pengguna
Introduction

Tour the Screen

Upper left corner
of the screen
contains the
Settings icon
which provides
access to Standby
mode, System
information and
the Do Not Disturb
feature.
Tip When set to Do Not Disturb, ringtones are muted and call attempts made by
D1509712 User Guide
Cisco TelePresence SX10, SX20
others to reach you will appear as missed calls. You may, however, place calls as
Produced: June 2017 for CE9.1
much as you like.
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
An icon will appear to the
right of the Settings button if
Proximity is available for this
system (see text at right for
more on this feature).
The Call button
The Share
located to the
Content button
left in the lower
is located to
part of the
the right in the
display.
lower part of the
display.
The Camera
Control menu icon
is located in the
upper right corner
of the display.
If a messaging
system exists
for your
system, access
messages from
here.
As default, there is a 60 minutes timeout on the Do not disturb (after which the
system will return to normal operation), but this may have been changed to a
different setting by your Video Support Team.

Operating tips

Use the Cursor controls the remote
control to move about the screen
and press OK/Enter to open the
selected menu field.
Use the Cancel key to exit a menu
(and return to the Home screen)
undoing any changes. Use the Back
key to go just one step back.
The remote control buttons are
described on the following pages.
The Intelligent Proximity feature
allows you to share, see and capture
content from a video system
wirelessly on your own device. You
can also use your own device to
control calls on the video system. See
also
"Intelligent Proximity" on page
22.
5