Cisco TelePresence SX10 Panduan Pengguna - Halaman 36

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 37 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Pengguna (26 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Halaman Cetak
Cisco TelePresence SX10 Panduan Pengguna
Settings

Gain Access to the Settings

1
To gain access to the Settings menu,
navigate to the upper left corner of the
screen and press OK on the remote
control. Then navigate down to System
Information (number two from the
bottom of the menu) and press OK
again.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
The Settings shows basic information about the system as well as providing access to the
Setup Wizard and the ability to force a restart of the system.

About Settings

The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
You may now specify ringtone and
volume from this menu.
36