Cisco TelePresence SX10 Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 34 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Pengguna (26 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Availability

Enable Do Not Disturb

Starting from Home screen, use the Cursor keys on the

remote control to select the Settings field in the upper

left corner of the screen.

Use the Down Cursor button on the remote control to

navigate down to Do Not Disturb (one step down) and

use the OK button on the remote control to set it to On

or Off (toggling). If your system has Intelligent Proximity

enabled you will need to press the Down Cursor button

twice.

Press OK on the remote control.

Press the OK key on the remote control to exit the menu,

putting changes into effect.

About Do Not Disturb

Your system can be set up so that it

does not respond to incoming calls.

When set to Do Not Disturb, ringtones

are muted and call attempts made

by others to reach you will appear as

missed calls. You may, however, place

calls as much as you like.

As default, there is a 60 minutes

timeout on the Do not disturb (after

which the system will return to normal

operation), but this may have been

changed to a different setting by your

Video Support Team.

D1509708 User Guide

Cisco TelePresence TRC 6

Produced: July 2016 for CE 8. 2