Cisco TelePresence SX20 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX20. Cisco TelePresence SX20 2 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX20: Set Cepat (8 halaman), Panduan Memulai (41 halaman), Panduan Memulai (42 halaman), Panduan Referensi Cepat (2 halaman), Set Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pemecahan Masalah (37 halaman), Panduan Informasi Kepatuhan Peraturan dan Keselamatan (9 halaman), Setup Manual (8 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (42 halaman), Panduan Referensi (8 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence SX20 Panduan Pengguna
Place Call
Make sure Call is selected
and press OK or the green
Call button on the remote
control.
Use the Cursor keys of
the remote control to
select the Search or Dial
field, as outlined.
To enter numbers just
press the corresponding
keys on the remote.
To invoke the virtual
keyboard, use the left
arrow Cursor key to move to the 123 field. You may now
move about the keyboard and select characters. Press OK
to select a character.
Select the green Call field on the scren or press the green
Call button on the remote to place the call
Place Call from Contact List
Make sure Call is selected
and press OK or the green
Call button on the remote
control.
Use the Cursor keys on
the remote control to
go between Favorites,
Recents and Directory
and then down in one of
the lists.
Once an entry has been
located, press OK on the
remote control to invoke
the Call menu. Then press
the green Call button or
the OK button on the remote control to place the call.
Change the Screen Layout
Navigate to Layout (
) in
the upper right corner and
press OK on the remote
control. This icon will
appear only when relevant.
Use the Arrow keys on
the remote control to
move horizontally to the
new layout you would like
to use and press OK.
Receive or Decline Calls
If someone calls you,
you may accept, decline
or ignore the call.
If you decline the call,
busy information will
be
sent to the calling party.
You may also use the
keys on the remote
control directly.
CE8.0
Cisco TelePresence SX10, SX20
Quick Reference Guide