Sony BVP-950WSPK Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Camcorder Sony BVP-950WSPK. Sony BVP-950WSPK 40 halaman. Color video camera

Halaman Cetak

Location and Function of Parts

1 FILTER LOCAL (filter local control) button

Press the CC or ND filter button while pressing this

button to enable switching of the CC and ND filters.

2 ND filter button

Selects the desired ND filter while pressing the

FILTER LOCAL button.

Filter No.

Filter

Clear

3 CC (color temperature conversion) filter button

Selects the desired CC filter suitable for the lighting

conditions while pressing the FILTER LOCAL button.

Filter No.

Filter

Cross filter

3200K (Clear)

4300K

6300K

8000K

4 WHITE (white balance memory select) switch

Selects the white balance adjustment method and

memory to store the adjusted value.

PRESET: White balance is automatically adjusted to

the preset value for the color temperature of 3200K.

A or B: Memory A or B is selected.

5 OUTPUT/AUTO KNEE (output signal select/

auto knee) switch

Selects an output signal supplied to a VTR, viewfinder

and video monitor (color bar signals or camera

picture). When a camera picture is selected, the auto

knee function can be activated.

BARS/OFF: Color-bar signals are output, and the

auto-knee circuit does not function.

CAM/OFF: A camera picture is output, but the auto-

knee circuit does not function.

CAM/ON: A camera picture is output, and the auto-

knee circuit functions.

6 (E)

6 GAIN switch

Selects the appropriate video gain according to the

illumination of the subject to be shot. The values for

positions L, M, and H are set with the Setup Menu on

the viewfinder screen.

For details, refer to the System Manual.

7 VTR switch

Selects the control signal for the VTR when the VTR

is connected to this unit using the optional CA-553/

553P Camera Adaptor. According to the setting of this

switch, the VTR starts recording as follows:

SAVE: Power-save position for recording. Recording

starts a few seconds after the VTR START button

is pressed. A newly recorded picture may not

smoothly be connected to the previously recorded

part.

STBY (standby): Recording starts immediately upon

pressing the VTR START button.

Note

The WHITE 4, OUTPUT/AUTO KNEE 5, GAIN 6,

and VTR 7 switches do not function when the camera

is connected to a Camera Control Unit (CCU).

8 ENTER/CANCEL switch

Functions when the DISPLAY switch is set to MENU

(Menu mode).

ENTER: Activates the selection made by the MIC 1

LEVEL control.

CANCEL: Cancels the selection made by the MIC 1

LEVEL control and restores the previously selected

menu item.

For menu operations, refer to the System Manual.

9 DISPLAY switch

Used for displaying the camera status such as switch

settings, items and results of automatic adjustments on

the viewfinder screen.

ON: Display function is activated.

OFF: Display function is not activated.

MENU: A screen for setting the displaying items and

functions appears. The MIC 1 LEVEL control on

the front panel functions as the menu item selector.

For menu operations, refer to the System Manual.