Cisco TelePresence VX Clinical Assistant Instalasi dan Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence VX Clinical Assistant. Cisco TelePresence VX Clinical Assistant 33 halaman. Mobile video system

Halaman Cetak

Installing Options

Enabling the Dual Display Option

The VX Clinical Assistant can accommodate a second

display for an enhanced telepresence session or

presentation. An HDMI EXTENSION CABLE is made

available for easy access to connect to within the

support column.

1. Remove the ACCESS PANEL on the lower column by

unscrewing the THUMBSCREW (1) near the top of the

plate.

2. Locate the HDMI EXTENSION and securely connect the

USER SUPPLIED HDMI CABLE to the EXTENSION.

3. Replace the ACCESS PANEL while ensuring the HDMI

CABLE is able to exit the COLUMN through the egress

at the top of the ACCESS PANEL.

4. Connect the HDMI Cable to the display you intend to

use.

NOTE: Ensure power is provided to the display and is ON.

NOTE: Place the second display on a secure and stable

location to avoid damage or injury.

5. Press and hold

(LAYOUT Button) on the SOURCE

CONTROL interface for five seconds to enable the Dual

Display option.

NOTE: When a second display is connected, the default

mode will present Single Display mode where the displays

are mirrored.

6. Use the SOURCE CONTROLS to present different

content on the second display.

NOTE: Turning the system off with the Power Button on

the Battery Meter Panel will revert the Dual Display setting

to Single Display mode. Placing the system on Standby

does not alter the Dual Display setting.

141299.21 Cisco TelePresence VX Clinical Assistant