Cisco 2100 Series Panduan Konfigurasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco 2100 Series. Cisco 2100 Series 40 halaman. Cisco 8500 series wireless lan controller
Juga untuk Cisco 2100 Series: Panduan Memulai Cepat (49 halaman), Panduan Konfigurasi (50 halaman), Panduan Memulai Cepat (12 halaman)

Halaman Cetak

Section 1: Configuration for SVP Operation

Network Topology

Configuring a New Controller Starting from Factory Defaults

PN: 1725-36192-001_H

Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs

SIP PBX

SVP Server

LINK

ACT

LINK

ACT

STATUS

PS1

ALARM

PS2

SERVICE

CONSOLE

UTILITY

Cisco WLC

Cisco AP

SpectraLink 8000 series

Wireless Telephones

This configuration is not applicable to all customer environments.

1. Initial provisioning of the controller is done via the command line

interface (CLI). Connect a null modem serial cable between the

console port of the controller and the serial port of a PC.

2. Open a terminal program, such as Hyper Terminal, and configure the

port settings to 9600 baud, no parity, 8 data bits and 1 stop bit.

RADIUS Authentication Server

(for WPA2-Enterprise Security)

TFTP Server, DHCP Server

Cisco 4400 Series

WIRELESS LAN CONTROLLER

LINK

ACT

MODEL 4402 50 AP

Cisco AP

Wireless Data Client