Cisco 2100 Series Panduan Konfigurasi - Halaman 43

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco 2100 Series. Cisco 2100 Series 50 halaman. Cisco 8500 series wireless lan controller
Juga untuk Cisco 2100 Series: Panduan Konfigurasi (40 halaman), Panduan Memulai Cepat (49 halaman), Panduan Memulai Cepat (12 halaman)

Halaman Cetak

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

iv If present (7.4. and later versions), ensure that WPA gtk-randomize State is set

to Disable.

On versions before 8.3, the Fast Transition and FT PSK radio boxes must

unchecked if present. In 8.3+ versions, Adaptive may be selected from the Fast

Transition dropdown box. The Adaptive Fast Transition feature adapts to

whether the client (handset) supports Fast Transition (802.11r) roaming or not.

This allows Spectralink handsets to exist on the same SSID as clients that

support FT. However, the Adaptive mode was found to be incompatible in the

AP 3600-Series AP's.

○ For WPA-PSK, under WPA+WPA2 Parameters:

vi Select the WPA-Policy check box.

vii Select the TKIP check box for WPA Encryption.

viii At Auth Key Mgmt select PSK from the drop-down list. The PSK Format may be

selected as ASCII or HEX for both WPA-PSK and WPA2-PSK policies.

ix On versions before 8.3, the Fast Transition and FT PSK radio boxes must

unchecked if present. In 8.3+ versions, Adaptive may be selected from the Fast

Transition dropdown box. The Adaptive Fast Transition feature adapts to

whether the client (handset) supports Fast Transition (802.11r) roaming or not.

This allows Spectralink handsets to exist on the same SSID as clients that

support FT. However, the Adaptive mode was found to be incompatible in the

AP 3600-Series AP's.

If present (7.4. and later versions), ensure that WPA gtk-randomize State is set

to Disable.

unchecked as desired.

○ For WPA2-Enterprise (802.1X), select WPA+WPA2 Parameters:

Select the WPA2 Policy check box.

Select the AES check box for WPA2 Encryption.

iii At Auth Key Mgmt, select 802.1X+CCKM from the drop-down list.

iv If present (7.4. and later versions), ensure that WPA gtk-randomize State is set

to Disable.

On versions before 8.3, the Fast Transition and FT 802.1X radio boxes must

unchecked if present. In 8.3+ versions, Adaptive may be selected from the Fast

Transition dropdown box. The Adaptive Fast Transition feature adapts to

whether the client (handset) supports Fast Transition (802.11r) roaming or not.

This allows Spectralink handsets to exist on the same SSID as clients that

support FT. However, the Adaptive mode was found to be incompatible in the

AP 3600-Series AP's.

721-1001-000-AH.docx

December 2016

The Fast Transition and FT PSK radio boxes may be checked or