Cisco 2691 Series Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Jaringan Cisco 2691 Series. Cisco 2691 Series 48 halaman. Modular routers
Juga untuk Cisco 2691 Series: Menginstal dan Memformat (34 halaman), Lembar data (8 halaman), Panduan Memulai Cepat (29 halaman)

Cisco 2691 Series Panduan Pengguna
Cisco IOS features such as tunneling, data encryption, and termination of Remote Access WANs via
IPSec, Layer 2 Forwarding (L2F) and Layer 2 Tunneling Protocols (L2TP) make the Cisco 1700 an ideal
platform for building virtual private networks or outsourced dial solutions. Cisco 1700`s RISC-based
processor provides the power needed for the dynamic requirements of the remote branch office.

Cisco 1721 and 1760 Module Interfaces

The interfaces for the router are located on the rear panel of the Cisco 1721 and the front panel of the
Cisco 1760 as shown in
Figure 3
Cisco 1721 and Cisco 1760 Physical Interfaces
Kensington-compatible
locking socket
WIC 0 slot
SEE MANUAL BEFORE INSTALLATION
Model
WIC 0 OK
Cisco 1721
WIC 0
OK LED
WIC/VIC Slot 0
PWR
OK
PVDM 0
PVDM 1
MOD
SLOT 0
OK
OK
OK
OK
Power LED
MOD
Slot 0
Router
OK LED
LEDs
OK
PVDM 0/1
OK LEDs
The Cisco 1721 and 1760 routers feature console and auxiliary ports, single fixed LAN interfaces, two
Cisco WAN interface card (WIC) slots on the 1721, and two WIC slots and two Voice interface card
(VIC) slots on the 1760. WAN interface cards support a variety of serial, ISDN BRI, and integrated
CSU/DSU options for primary and backup WAN connectivity. All Cisco 1700 series routers include an
auxiliary port supporting 115Kbps Dial-On-Demand Routing, ideal for back-up WAN connectivity.
A WIC is inserted into one of the WIC slots, which are located on the back panel of the 1721 and the
front panel of the 1760. WICs interface directly with the processor, and cannot perform cryptographic
functions; they only serve as a data input and data output physical interface.
The physical interfaces include a power plug for the power supply and a power switch. The router has
one Fast Ethernet (10/100 RJ-45) connector for data transfers in and out. The module also has two other
RJ-45 connectors on the back panel for a console terminal for local system access and an auxiliary port
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
OL-6083-01
Figure
Console port
CONSOLE
DSU
56K
10/100 ETHERNET
FDX
100
LINK
AUX
10/100-Mbps
Ethernet port
FDX/100/
Auxiliary port
LINK LEDs
WIC/VIC Slot 1
Console port
10/100 ETHERNET
0
1
SLOT 1
0
1
ACT
COL
FDX
100
LINK
OK
Ethernet
Ethernet
Slot 1
LEDs
port
LEDs
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
3.
WIC 1 slot
MOD OK
WIC 1 OK
MOD OK
LED
WIC 1 OK
LED
VIC Slot 2
CONSOLE
THESE SLOTS ACCEPT ONLY VOICE INTERFACE CARDS
AUX
SLOT 2
0
1
OK
Auxiliary
Slot 2
port
LEDs
Power switch
+5, +12, -12 VDC
Power
socket
VIC Slot 3
Cisco 1700
Series
SLOT 3
0
1
OK
Slot 3
LEDs
5