Cisco 3020 - Cisco Catalyst Blade Switch Catatan Rilis - Halaman 24

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Perangkat Keras Jaringan Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 41 halaman. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Juga untuk Cisco 3020 - Cisco Catalyst Blade Switch: Panduan Memulai (37 halaman), Panduan Memulai (31 halaman), Quickspecs (12 halaman), Catatan Rilis (27 halaman), Catatan Rilis (23 halaman), Catatan Rilis (21 halaman), Panduan Instalasi (21 halaman)

Halaman Cetak
Cisco 3020 - Cisco Catalyst Blade Switch Catatan Rilis
Documentation Updates
Command Modes
Interface configuration
Command History
Release
12.2(35)SE
Usage Guidelines
You must enter the dot1x port-control auto interface configuration command on a switch port before
entering this command.
Examples
This example shows how to specify a fallback profile to a switch port that has been configured for
IEEE 802.1x authentication:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# interface gigabitethernet1/0/3
Switch(config-if)# dot1x fallback profile1
Switch(config-fallback-profile)# exit
Switch(config)# end
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands
Command
show dot1x [interface interface-id]

fallback profile

ip admission
ip admission name proxy http
fallback profile
Use the fallback profile global configuration command on the switch stack or on a standalone switch to
create a fallback profile for web authentication. To return to the default setting, use the no form of this
command.
Syntax Description
profile
Defaults
No fallback profile is configured.
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(35)SE and Later
24
Modification
This command was introduced.
fallback profile profile
no fallback profile
Specify the fallback profile for clients that do not support IEEE 802.1x
authentication.
Description
Displays IEEE 802.1x status for the specified port.
Create a web authentication fallback profile.
Enable web authentication on a port
Enable web authentication globally on a switch
OL-8918-03