Cisco 3105 Manual - Halaman 28

Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco 3105. Cisco 3105 42 halaman.

SSDs

Caution

If you have only one SSD, you cannot remove it while the firewall is powered on.

Caution

You cannot swap SSDs between different platforms. For example, you cannot use a 2100 series SSD in a

3100 series model. If you are swapping SSDs between two Secure Firewall 3100s, use the remove-secure

local disk command, otherwise sometimes the SED (self-encrypting drive) gets locked. If you get an error

message that the SED is locked, you can enter the PSID and the system clears the SED and creates a new set

of keys. To avoid this situation, especially if you do not know what the PSIDs are, always use the

remove-secure local disk when removing SSDs. See

for the procedures for safely removing an SSD.

See

Product ID Numbers, on page 33

Figure 14: SSD

SSD release tab

For More Information

• See

• See the configuration guide for your software for the procedures for removing and adding an SSD from

the RAID1 configuration.

Overview

Front Panel LEDs, on page 11

Remove and Replace the SSD

Hot Swap an SSD on the Secure Firewall 3100/4200

for a list of the PIDs associated with the Secure Firewall 3100 SSDs.

—

for the location and description of the SSD LEDs on the front panel.

for the procedure for removing and replacing the SSD.

Overview