DIGITECH Audio AR1889 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Stasiun Docking DIGITECH Audio AR1889. DIGITECH Audio AR1889 6 halaman. Portable stereo speakers with dock for ipod and iphone
Halaman Cetak
To setup your iPod® speaker system, please follow these simple steps:
1) Carefully unpack speaker and power supply.
2) Carefully unwind power supply cable and connect to the socket
on the rear of the speaker unit. Connect the power supply plug
pack to a suitable mains outlet.
3) Place unit on a stable, flat, level surface out of direct sunlight.
Always avoid leaving the unit in direct sunlight as this may
cause damage.
4) To turn your speaker unit on, simply press the power button
on the top of unit. The power indicator should glow.
®
®
To dock, charge and play your iPod® or iPhone®, please follow the
following instructions.
1. Open the iPod® dock.
2. Fit the iPod® carefully into dock, docking connector should easily
connect with the socket on your iPod®. Please note: Do not force iPod®,
but carefully slide over the dock connector as force may damage
your iPod®.
3. Turn speaker unit on, the iPod® should indicate that power is now
connected.
4. Select your desired song.
5. Press play.
6. Volume can be adjusted by using the volume control buttons
on the top of the unit.
NOTE: the product has a standard iPod® dock compatible with the
Apple® dock insert supplied with your iPod® or iPhone®.
To use dock insert, simply fit to dock on your speaker unit.
The product will operate from a battery source for up to 3 hours
when operated from Alkaline batteries (not supplied). Performance
and sound quality may vary depending upon quality and age of
batteries. We recommend Alkaline batteries for best performance.
Do not mix battery types or old batteries with new. Do not leave
batteries in unit for an extended period of time.
NOTE: unit will not charge your iPod® or iPhone® when operated
from batteries.
To listen to an audio device via the Auxiliary Input please follow
these instructions.
1. Connect an audio source such as a third party MP3 Player, PC,
CD Player or other audio source via the 3.5mm Auxiliary Input
socket located on the rear of the unit.
2. Turn the unit on and use the +/- volume buttons to select the
required volume.
NOTE: Connecting a plug into the 3.5mm "Aux" socket on the rear
of the unit will bypass any audio from an iPod®/iPhone® docked on
the top of the unit. The iPod®/iPhone® will continue to charge.