Sony XDCAM PDW-HR1 Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Sony XDCAM PDW-HR1. Sony XDCAM PDW-HR1 16 halaman. Sxs memory card adaptor
Juga untuk Sony XDCAM PDW-HR1: Brosur & Spesifikasi (28 halaman), Panduan Pengoperasian (49 halaman), Brosur (4 halaman)

Halaman Cetak

8. Turn the unit upside down, remove the six screws, and

then remove the bottom panel assembly.

After the bottom panel assembly is removed, be care-

ful not to damage the IC on the EM-8 board.

Bottom panel assembly

B3 x 6

EM-8 board

9. When the TSI-60A board (PDBK-202) is mounted on

the VPR-15 board, remove the four screws and remove

the TSI-60A board.

CN100

CN400

VPR-15 board

PDBK-MK1

B3 x 6

PSW2.6 x 6

TSI-60A board

10. Remove the nylon rivet from the VPR-15 board, and

install the supplied harness clamp instead.

11. Connect the supplied coaxial cable to the connectors

CN202, CN203, and CN204 on the VPR-15 board, and

then pass the coaxial cable through the harness clamp.

Coaxial cable

Harness

clamp

Nylon rivet

Connector

Support

Pass the coaxial cable between

the support and the connector.

12. Remove the nylon rivet from the NET-5 board, and

install the supplied harness clamp instead.

13. Connect the supplied harness (IF-DPR) to the connec-

tor CN2 on the IF-1101 board, and then pass the

harness through the harness clamp.

Harness (IF-DPR)

Harness

clamp

Nylon rivet

CN2 IF-1101 board

VPR-15 board

Red

Green

Blue

CN203

CN204

CN202

NET-5 board

1-3 (E)