Argo HI FAN black mini Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Pemanas Argo HI FAN black mini. Argo HI FAN black mini 4 halaman. Ceramic fan heater
• Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the
cord far away from busy areas or where it cannot be accidentally pulled-out.
• Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.
• Do not position the fan heater below a socket outlet.
• Do not operate the appliance outdoors.
WARNING: do not use the fan heater with a controller or any other device that activates the appliance
automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.
• Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the
initial heating up of the internal heating elements, and should not recur later on.
• Non posizionare il termoventilatore sotto una presa.
WARNING:
DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING
POWER. WHEN SERVICING OR MOVING THE HEATER, ALWAYS UNPLUG THE POWER CORD.
1. On/off and selection knob
2. Discharge grille
Connect the power cord to a suitable electric socket (230V).
Position the on/off and selection knob to 'Hi' or 'Low'.
To operate the fan heater at
maximum power (1200 W) position
the knob to 'Hi'.
This fan heater can be positioned on the floor or on an item of furniture or shelf.
The appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the
product inclination is greater than 45°. (This is a safety mechanism containing a steel ball: by moving the
product, you can hear the ball move).
Do not position the appliance on its side or upside down.
V 05/10
DESCRIPTION OF PARTS
HOW TO USE THE FAN HEATER
To operate the fan heater at
minimum power (800 W) position
the knob to 'Low'.
3. Air filter
4. Air suction grille
5. Power cord
To turn the fan heater off,
position the knob to 'Off'.
3