Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Perangkat Keras Jaringan Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Panduan Pemecahan Masalah (11 halaman), Catatan Instalasi (18 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Figure 5

Remove the one cap nut.

Step 8

Holding the DFC3 daughter card with both hands, gently lift it straight up from the module. (See

Step 9

Figure

antistatic bag.

78-15893-08

Unseat the DFC3 Daughter Card from the Module

WS-X5530

6.) Immediately place the DFC3 daughter card on an antistatic mat, antistatic foam pad, or in an

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Lift here

Rock up

and down

Removing a CFC or DFC Daughter Card