Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi - Halaman 19

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Perangkat Keras Jaringan Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Panduan Pemecahan Masalah (11 halaman), Catatan Instalasi (18 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Figure 9

Lift here to

unseat DFC

power connector

Upgrading the Ethernet Module Memory

When you upgrade your Ethernet module with either a DFC3BXL or DFC3CXL daughter card, you must

also install a 1-GB memory upgrade (part number MEM-XCEF720-1GB) on the Ethernet module. This

1-GB memory upgrade is included with your DFC3BXL or DFC3CXL upgrade kit and installs on the

Ethernet module in a small-outline dual-inline memory module (SODIMM) chip socket located

underneath the DFC daughter card.

You must perform the memory upgrade procedure after you remove the CFC or the DFC daughter card

Note

from the Ethernet module and before you install either the DFC3BXL or DFC3CXL daughter card

upgrade.

78-15893-08

Removing the DFC3 Daughter Card (WS-X6748-GE-TX Equipped with a Front Stiffener

Bracket)

Stiffener

bracket

WS-X5530

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

Upgrading the Ethernet Module Memory

Stiffener bracket tabs