Cisco 7246 - uBR Router Mengkonfigurasi - Halaman 11

Jelajahi secara online atau unduh pdf Mengkonfigurasi untuk Perangkat Keras Jaringan Cisco 7246 - uBR Router. Cisco 7246 - uBR Router 28 halaman. 7200 series port adapter hardware configuration guidelines
Juga untuk Cisco 7246 - uBR Router: Panduan Pengguna (7 halaman), Panduan Tambahan (42 halaman)

Halaman Cetak
Cisco 7246 - uBR Router Mengkonfigurasi
Troubleshooting Tips
If you are having trouble:
•
•
•
•
Activate the Downstream Carrier
To activate a downstream port on a cable modem card for digital data transmissions over the HFC
network, use the following commands in global configuration mode:
Step
1
2
Validation Tips
To verify that the downstream carrier is active (up), enter the show controllers cable command for
the downstream port that you have just configured:
Troubleshooting Tips
If you are having trouble with this configuration:
•
•
•
Make sure the cable connections are not loose or disconnected.
Make sure the cable modem card is firmly seated in its Cisco uBR7246 chassis slot.
Make sure that you have entered the correct slot and port numbers when you typed the command.
Make sure the downstream carrier is active by entering the cable downstream if-output
command.
Command
interface cable port/slot
cable downstream if-output
router# show controllers cable 6/0 downstream
Cable6/0 Downstream is up
Frequency=96000000, Channel Width 6 MHz, 64-QAM, Symbol Rate 5.056941 Msps
FEC ITU-T J.83 Annex B, R/S Interleave I=32, J=4
Make sure the cable connections are not loose or disconnected.
Make sure the cable modem card is firmly seated in its Cisco uBR7246 chassis slot.
Make sure that you have entered the correct slot and port numbers when you typed the command.
Purpose
Specify a cable interface and enter the cable interface
configuration mode.
Activate downstream digital data from the Cisco uBR7246.
(This is the default setting.)
Configuring Cisco uBR7246 Universal Broadband Router Features VC-143
Activate the Downstream Carrier