Cisco 7505 Manual Petunjuk Penggantian - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Penggantian untuk Perangkat Keras Jaringan Cisco 7505. Cisco 7505 23 halaman. 600w ac-input power supply and fan tray replacement
Juga untuk Cisco 7505: Panduan Petunjuk Instalasi (15 halaman), Panduan Memulai Cepat (32 halaman), Manual Petunjuk Penggantian (18 halaman)

Halaman Cetak

If these conditions are not true, for instance, if you must remove a rack-mounted chassis

Note

before you can install the new chassis, you must disconnect all power and network interface cables.

Also, ensure that your new chassis allows sufﬁcient clearance for maintenance: to remove and

replace processor modules and interface cables at the interface processor end, and to access the

internal components at the noninterface processor end. Figure 4 shows the chassis footprint and the

clearance required to remove or install each of the major components.

Figure 4

Chassis Footprint and Clearance Requirements for Maintenance

2 in.

(5.08 cm)

Chassis foot C

14.25 in. (36.20 cm)

Power supply width

14.60 in. to ears (37.08 cm)

Noninterface processor end

Interface processor end

Interface processor width

14.55 in. (36.96 cm)

Chassis width

17.50 in. (44.45 cm)

Cisco 7010 and Cisco 7505 Chassis Replacement Instructions

Prerequisites

1.25 in. (3.18 cm)