Cisco 7600 Series Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Jaringan Cisco 7600 Series. Cisco 7600 Series 14 halaman. Cisco 7609: frequently asked questions
Juga untuk Cisco 7600 Series: Pertanyaan yang Sering Diajukan (5 halaman)
Halaman Cetak
Cisco 7600 SIP-400 Overview
Cisco 7600 SIP-200 Default DIP Switch Settings
If SW3 and SW10 switches are present on the board, make sure they are set to the default settings, as
shown in
The switches are set to their defaults during manufacture. However, the switch settings may get
inadvertently changed during handling.
Note
If the switches are not set to their default settings, there may be momentary packet drops during OIR of
the board.
Table 2-6
Cisco 7600 SIP-200 Default DIP Settings
Switch
Default Position
SW3
Up
SW10
Down
Figure 2-6
Cisco 7600 SIP-200 DIP Switch Locations
\
76 00
-M S C
-2 00
M O DU
LA R
SE RV
IC ES
CA RD
1 SW3
Cisco 7600 SIP-400 Overview
The following sections describe the Cisco 7600 SIP-400 (Cisco part number 7600-SIP-400):
•
•
•
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
2-8
Table
2-6. See
Figure 2-6
2 SW10
Cisco 7600 SIP-400 Processor, page 2-9
Cisco 7600 SIP-400 LEDs, page 2-9
Cisco 7600 SIP-400 Physical Specifications, page 2-9
for the location of the switches.
Chapter 2
Overview: Cisco 7600 Series SIPs
1
2
OL-5052-14