Argo DRY NATURE 21 Panduan Petunjuk Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Dehumidifier Argo DRY NATURE 21. Argo DRY NATURE 21 15 halaman.

TOUCH BUTTONS AND LED INDICATORS

The buzzer will alarm for several times when the unit is powered on, the LED will show the room humidity

for 3 seconds, then it will automatically turn off.

1.Turn on/off button

Touch the button

is operating.

2. Humidity setting button

Touch the button

from 40% to 80%, every setting is 5%, the LED flashing display when adjusting. Stop pressing for 5

seconds, it will return to normal display. The default value of humidity is 55%.

3. Fan-speed setting button

Touch the button

lighted.

4.Swing setting button

After the appliance is started, touch the button

5.Time-setting button

Touch the button

time, you may touch

Touch

to enter shutdown-time setting state when the unit is running, then the LED will display the

time, you may touch

Once turned on or off by user or entering water-full state, the unit may loose the timing function.

V 04/20

to start the unit when the unit is stop, or touch

to enter humidity-setting state, then touch

to set the fan speed to HIGH or LOW, and the corresponding fan speed light will be

to enter boot-time setting state when the unit is stop, then the LED will display the

button to adjust the automatic boot time from 1 to 24 hours.

button to adjust the automatic shutdown time from 1 to 24 hours.

to start or stop the air-outlet leaf swing

to shutdown it, when the unit

to adjust the humidity