Sony A 7 R IV Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Digital Sony A 7 R IV. Sony A 7 R IV 6 halaman.

to save up to 3 custom white balance references. This white balance setting

will stay in effect until a new custom white balance is registered under the

same memory number.

9. Make sure that the number you registered (ie

balance that you are set to on the White Balance mode screen.

10. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

11. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A900

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Press the WB (White Balance) Button to display the White Balance mode

screen.

4. Select a custom white balance item (

selector, then press the center of the multi-selector.

5. Select (

SET) with the !/" on the multi-selector, then press the center of

the multi-selector.

6. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera.

7. The shutter clicks and the calibrated values (ColorTemperature and Color

ﬁlter) are displayed.

8. Select a memory number with !/" (

selector. The Sony A900 allows you to save up to 3 custom white balance

references. This white balance setting will stay in effect until a new custom

white balance is registered under the same memory number.

9. Make sure that the number you registered (ie.

balance that you are set to on the White Balance mode screen.

10. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

11. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A6400

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. From the MENU navigate to the Camera Settings1 screen and select White

Balance and then select [from Custom1] to [Custom 3], and then press the

"Sony" and the Sony camera models listed are trademarks of Sony, Inc.

1), is the same white

*) using the !/" on the multi-

1), then press the center of the multi-

1), is the same white