Argo LILIUM EVO 13 Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Dehumidifier Argo LILIUM EVO 13. Argo LILIUM EVO 13 12 halaman.

LED TIMER

LED TANK FULL

LED DEFROST

LED CHILD LOCK

HIGH-LOW FAN

SPEED LED

"+" AND "-"

(3)

BUTTON

BUTTONS

(1) ON/OFF BUTTON

Press this button to turn the dehumidifier on and off.

(2) MODE BUTTON

Press this button to enter the mode selection state: the corresponding led will light on. Press "+" or "-" button to set

the mode; the current mode led will flash. You can select 4 different modes: Deumidify, Automatic, Continuous and

Fast dry clothes. Press the mode button again to confirm the mode selection.

(3) "+" & "-" BUTTON

Press this button to set the humidity, timing and dehumidification mode.

The humidity can be set only in dehumidify mode from 30% to 80% by pressing these buttons.

The timer can be set from 1 to 24 hours by pressing these buttons.

The dehumidification mode can be set by pressing MODE button and then "+" and "-" buttons; the corresponding led

indicator lights on.

(4) FAN BUTTON

Press this button to set the fan speed: high and low speed; the corresponding led lights on.

NOTE: This button is valid only when DEUMIDIFY and FAN mode are set.

(5) TIMER ON/OFF BUTTON

Press this button to set the timer from 1 to 24 hours.

If the timer is set to 0 and you press TIMER button or there is no operation in 5 seconds, the dehumidifier will

automatically enter the time off work state.

If the timer isn't set to 0 and you press TIMER button, the dehumidifier will automatically enter the time off work

state and led lights off; if you don't press the TIMER button and there is no operation in 5 seconds, the time will set

automatically and LED TIMER lights on. After 5 seconds, the humidity level will return on display.

V 11/18

CONTROL PANEL

DISPLAY

(5) TIMER

BUTTON

OPERATION LED

(2) MODE BUTTON

(4) FAN

BUTTON

(1) ON/OFF

BUTTON

(3)