Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Manual - Halaman 8
Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 11 halaman. Installing the controller
Juga untuk Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base: Panduan Pemecahan Masalah (23 halaman)
Halaman Cetak
Reversing the Cable Management Arm (Optional)
Figure 4: Attaching the Cable Management Arm to the Rear of the Slide Rails
1
2
Reversing the Cable Management Arm (Optional)
Step 1
Rotate the entire CMA assembly 180 degrees. The plastic cable guides must remain pointing upward.
Step 2
Flip the tabs at the end of each CMA arm so that they point toward the rear of the controller.
Step 3
Pivot the tab that is at the end of the width-adjustment slider. Depress and hold the metal button on the outside of the tab
and pivot the tab 180 degrees so that it points toward the rear of the controller.
Installing the Controller
8
CMA tab on arm farthest from controller
and end of stationary outer slide rail
CMA tab on arm closest to the controller
and end of inner slide rail attached to
controller
3
CMA tab on width-adjustment slider
and end of stationary outer slide rail
4
Rear of controller
Installing the Controller