Cisco ACS-GSR12-CCBLM Panduan Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perangkat Keras Jaringan Cisco ACS-GSR12-CCBLM. Cisco ACS-GSR12-CCBLM 14 halaman. Gigabit switch router cablemanagement kit
Halaman Cetak
Doc. No.
78-4346-02
Cisco 12012 Gigabit Switch Router Cable-
Management Kit Installation Instructions
Product Numbers: ACS-GSR12-CCBLM=, ACS-GSR-LCCBLM=
Document Order Number: DOC-784346=
This document contains instructions for installing or replacing cable-management kit components in
the Cisco 12012 Gigabit Switch Router (GSR).
The sections in this document include the following:
•
Product Overview, page 1
•
Safety Guidelines, page 4
•
Tools and Parts Required, page 5
•
Removing and Replacing the Cable-Management System, page 6
•
FCC Class A Compliance, page 12
•
Cisco Connection Online, page 13
Product Overview
The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to
Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route
processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is
reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line
cards and the RP in any of the first 12 available slots.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997-2002
Cisco Systems, Inc.
All rights reserved.
1