Argo FX310G Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Penghancur Kertas Argo FX310G. Argo FX310G 16 halaman. Wallner shredders

PARtS AND FUNCtIONS

•

Unpack and set machine upright.

•

Put the machine on a horizontal surface.

•

Plug in the machine.

•

The socket-outlet should be installed near the equipment and shall be easily accessible

FEEDING thE PAPER

1. Please check the voltage of your shredders carefully before using and then plug in

and press the switch, the power light is now on. The shredder is equipped with energy

saving system. after 5 seconds of iddle state the machine goes in "sleep mode", it takes

low power (almost "0") - the POWer signal turns off. When you insert the paper sheet

into entry gap the shredder goes in "stand-by" mode - the POWer signal ligths up.

2. Feed the paper into the proper entry and the machine will start automatically. When

the shredding will be over it will stop automatically.

3. if you want to stop shredding the paper, please set it to reverse. The machine will

reverse automatically and turn back the papers.

(Pic. 1)

1. reV – reverse button

2. FWd – forward shreddding

3. indocators:

POWer

Overloading

Overheating

Full bin

4. Paper entry

5. cd / credit card entry

6. Transparent window

7. Wastebasket

8. casters