Cisco aironet 1240 Panduan Konfigurasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco aironet 1240. Cisco aironet 1240 40 halaman. Wlc (wireless lan controller), wism (wireless services module) integrated wlc with aps

Halaman Cetak

Product Support

6
This document does not cover the steps involved in converting
autonomous APs to Lightweight mode such that they can be
controlled by the Cisco WLCs.
Please contact Cisco's Customer Support at
instructions on this procedure. Once the APs are converted, this
document can be used to provision APs.
This document does not cover the steps involved to configure a
RADIUS server required for using WPA2-Enterprise or Cisco FSR
security types.
1.
Installation and configuration guides for Cisco Wireless LAN
Controllers can be found on Cisco's website.
2.
To convert the Cisco 1200 Series Autonomous AP to Lightweight
mode, go to:
http://www.cisco.com/en/US/docs/wireless/access_point/con
version/lwapp/upgrade/guide/lwapnote.html
3.
For more information on the APs in Lightweight mode, see
Aironet Access Point Support for Lightweight Access Point
Protocol [Cisco Aironet 1130 AG Series] and Cisco Aironet Access
Point Support for Lightweight Access Point Protocol [Cisco
Aironet 1240 AG Series].
4.
Screen captures included in this document are for Cisco software
version 6.0.199.4. Refer to Version D of this guide for screen
captures for software version 5.2.193.0.
5.
For other assistance, contact either Cisco's or Polycom's customer
service at:
www.cisco.com
or
VIEW Certified Configuration Guide
www.polycom.com
www.cisco.com
for
Cisco
PN: 1725-36192-001_H