Cisco Aironet 1430 Series Panduan Memulai - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat Keras Jaringan Cisco Aironet 1430 Series. Cisco Aironet 1430 Series 48 halaman. Wireless bridge

Halaman Cetak
Revised October 2008 P/N 78-18922-01
1
About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 1430 Series
Wireless Bridge (hereafter called the bridge). This guide also provides bridge alignment instructions
and limited troubleshooting procedures.
The Cisco Aironet 1430 Series Wireless bridge is an updated replacement for the Cisco Aironet 1400
Series Wireless Bridge. The 1430 series is a 802.11a wireless bridge supporting point-to-point and
point-to-multipoint applications operating in the 4.9-, 5.6-, and 5.8-GHz spectrum. The bridge
delivers long-range, high capacity, and is easy to deploy. The bridge supports 40 MHz channelization
in the 5.6- and 5.8-GHz bands to deliver data rates at or above 130 Mbps. The bridge also supports
external and integrated antenna configurations for various deployment scenarios for enterprise and
commercial customer applications.
The bridge is deployed as an autonomous point-to-point bridge, providing intelligent network services
in a simple autonomous environment. Cisco's wireless controller software (WCS) management
provides centralized management and monitoring services for the bridge.
2
Safety Instructions
Translated versions of the following safety warnings are provided in the translated safety warnings
document that is shipped with your bridge. The translated warnings are also in the Translated Safety
Warnings for Cisco Aironet 1430 Series Wireless Bridges, which is available on your documentation
CD and cisco.com.
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. (To see
translations of the warnings that appear in this publication, refer to the appendix
"Translated Safety Warnings.")
Statement 1071
Warning
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.
Statement 1030
2
THIRD FCC DRAFT (CISCO CONFIDENTIAL)