DIGITEN DTC-101 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Termostat DIGITEN DTC-101. DIGITEN DTC-101 10 halaman.

Halaman Cetak
DIGITEN DTC-101 Manual
and outlined below.
1. Long press the SET button until "
2. Press
and
3. Press SET button to set next function.
4. Long press SET button to save and exit.

For example

User want to start cooling equipment when PV=28
equipment when PV=22
1. Long press the SET button until "
2. Press
and
3. Press SET button to set "
5. Press
and
6. Long press SET button to save and exit.
7. Connect the cooling equipment to the outlet.
How to restore default settings
Keep pressing SET key until connect the power to this device, controller
will restore factory setting after BI-BI-BI sound.

Function range and setting

CODE
Function
RV
Run Temperature Value
SV
Stop Temperature Value
AH
High Temperature Alarm
AL
Low Temperature Alarm
Time of Compressor Delay
DP
Starting
CA
Temperature Calibration
to adjust the temperature value.
, DP=3 minutes.
°C
to change the run temperature (RV) to 28
to change the SV to 22
" flashing.
" flashing.
" stop temperature (SV).
.
°C
Setting Range
-40~120°C
-40~248°F
-40~120°C
-40~248°F
-40~120°C
-40~248°F
-40~120°C
-40~248°F
0~10minutes
-15~15°C
-15~15°F
-4-
, and stop cooling
°C
.
°C
Default Setting
20°C
68°F
40°C
104°F
120°C
248°F
-40°C
-40°F
0
0°C
0°F