Sony NEX52LENSBDL Manual Fungsi - Halaman 2

Jelajahi secara online atau unduh pdf Manual Fungsi untuk Kamera Digital Sony NEX52LENSBDL. Sony NEX52LENSBDL 7 halaman. New functions provided by firmware update 04
Juga untuk Sony NEX52LENSBDL: Spesifikasi (2 halaman), Petunjuk 3D (9 halaman), Manual Fungsi (7 halaman), Spesifikasi (35 halaman), Garansi Terbatas (1 halaman), Manual Fungsi (6 halaman)

Halaman Cetak

New functions

The following new functions will be provided by this firmware upgrade.

Compatibility with the LA-EA2 Mount Adaptor

Using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately), you can take

advantage of the phase-detection AF feature to shoot images.

LA-EA2 Mount Adaptor

Notes

• You may not be able to use the LA-EA2 Mount Adaptor with certain lenses. You may not use

autofocusing with certain lenses attached via the Mount Adaptor. Consult your Sony dealer or local

authorized Sony service facility for advice on compatible lenses.

• When the lens has a focusing mode switch (AF/MF), set the focusing mode with the switch of the lens.

When the lens does not have the switch, set the focusing mode on the menu.

• It may take a long time or may be difficult for the camera to focus, depending on the lens used or the

subject.

NEX-3/5/5C/C3:

• The following functions do not work when the LA-EA2 Mount Adaptor is attached.

– [Smile Shutter]

– [Face Detection]

• The noise of the camera and lens in autofocusing operation may be recorded during movie recording.

Using an SSM lens will reduce the noise caused by autofocusing. Also, you can disable sound recording

by selecting [Menu] t [Setup] t [Movie Audio Rec] t [Off].

• Aperture is set to F3.5 when you record movies with autofocusing. When you are using a lens with an

F3.5 or smaller F-stop, aperture is set to the maximum F-stop of the lens. When you want to set your own

value for aperture to record movies, select [Aperture Priority] in [Shoot Mode], and select manual

focusing before you start recording. The aperture setting selected at the beginning will remain in effect

until you stop recording. You cannot change the aperture setting while recording a movie.

NEX-VG10/VG10E:

• If the camcorder focuses automatically during movie recording, the noise of the camcorder and lens in the

autofocusing operation is recorded. You can reduce the noise by connecting an external microphone with

a 3.5-mm-diameter mini-plug to the microphone jack of the camcorder, and placing the microphone as far

away from the camcorder as possible. If you want to eliminate the noise completely, it is recommended

that you select MENU t [Setup] t [Movie Audio Rec] t [Off].

A-mount lens

Continued r