Argo Wallner RS6600-C Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Penghancur Kertas Argo Wallner RS6600-C. Argo Wallner RS6600-C 16 halaman.
Halaman Cetak
Parts aND FUNctiONs
Pic. 1
OPeratiNG PaNel
1
start indicator
2
reverse indicator
3
Full-bin indicator
4
Open-door indicator
5
Over-heating indicator
6
stop button
7
loading indicator
8
reverse button
9
start button
© arGO s.a.
EN
(Pic. 1)
1
2
3
4
5
6
7
8
9
10
11
(Pic. 2)
it will lighten up when paper is inserted, and the machine will start to work
automatically.
it will lighten up if the machine is in reverse mode or too much paper is inserted.
The machine will eliminate paper jams.
it will lighten up when the box is filled with shreds. after emptying the wasteba-
sket, the machine will automatically return to the stand-by mode.
it will lighten up when the door is open. and the machine will not work for your
safety.
continuous work cannot exceed 60 minutes. after this time the over-heating
indicator will lighten up. allow the shredder to cool for 20 to 30 minutes befor
restarting.
Press this buttonto stop the machine's work.
indicates amount of inserted sheets of paper. The inserted amount of sheets exce-
eds indicated maximum amount of sheets, the machine will automatically start to
work in reverse mode
in case of pressing this button, the machine will work in reverse mode in orde to
eliminate paper jams. The machine overturns for 4 seconds and returns the paper
when pressing reverse button.
after this button is pressed, the machine starts to rotate cutting blades. if the
paper is not inserted into the entry within 1 minute, the blades are being stopped
automatically.
11
1. Paper entry
2. automatic feed sensor
3. cd/plastic card's entry
4. Top casing
5. Operating panel
6. Vent
7. Botton casing
8. door
9. Open-door signalizator
10. Wastebasket
11. Movable casters
1
2
3
4
5
6
Pic. 2
7
8
9
www.argo.pl