Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr Panduan Servis - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Servis untuk Kamera Digital Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr. Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr 30 halaman. Interchangeable lens digital camera/zoom lens kit
Juga untuk Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr: Manual Fungsi (7 halaman), Spesifikasi (2 halaman)
Halaman Cetak
Assembly Procedure
Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
* After applying grease, attach the Ball Bearings.
Ball Bearing
G G-15
G G-15 and G G-116
AS Slider B Assy
* After applying grease, attach the Ball Bearings.
Ball Bearing
G G-15
Ball Bearing
G G-15
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
1-6. METHOD FOR REPLACING THE AS HOLDER ACTUATOR ASSY
Removal Procedure
Note: Make sure to perform the removal procedures after removing the
AS Slider B Assy.
(1) Remove the solder on the enamel wires at two places.
Solder
(2) Remove the flexible board from the hook on the AS Holder Actuator
Assy.
Hook
(3) Remove the four screws to remove the AS Holder Actuator Assy.
AS Holder Actuator Assy
1-7. GPS RECEIVING CHECK (SLT-A55V/A55VL/A55VY)
After a part of set was replaced or after the set was assembled, check the reception of GPS signal.
1-3
– ENGLISH –
Assembly Procedure
Note: Make sure to perform the assembly procedures before assembling
the AS Slider B Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
G G-15 and G G-116
AS Holder Actuator Assy