Cisco Aironet 340 Series Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 halaman. Usb client adapter
Juga untuk Cisco Aironet 340 Series: Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (13 halaman), Catatan Rilis (14 halaman), Panduan Memulai Cepat (16 halaman), Panduan Memulai Cepat (12 halaman)

Install the Driver and Utilities

Note: The following procedures assume you are installing the driver from the CD provided.

If your PC does not have a CD-ROM drive, download the driver from Cisco's web site.

After you have installed the USB client adapter, the system automatically detects it, opens a New

Hardware Found window, and starts collecting information for a driver database.

Follow these steps to install the drivers:

When the Add New Hardware Wizard dialog box opens, it is searching for new drivers.

Click Next .

From the next dialog box, select Search for the best driver for your device (Recommended)

and click Next .

If asked which drive to choose to load drivers, select CD-ROM drive and deselect all other

options.

The hardware wizard will ﬁnd the installation ﬁles on the CD and display the search results.

When the USB adapter driver is displayed, click Next to copy the required ﬁles.

During driver installation, you may be prompted to enter a path to the required client

adapter or Windows ﬁles:

(a) Windows ﬁles installed on your PC are usually located in the folder

C:\Windows\Options\Cabs. Click OK to install.

(b) If the system prompts you for the Windows CD and the CD-ROM drive on your PC is

drive D, the path should be D:\WIN(either 98, 2K, or ME). Click OK to copy the

required ﬁles.

The Add New Hardware Wizard window again opens indicating that the installation is

complete. Click Finish.

Remove the CD and restart your laptop.